I bought my first Amazon Fire TV in the summer of 2014, and 2.5 years later I’m still loving this device. In fact, I liked it so much that I moved my whole house over to Fire TVs: living room, bedroom, and a fire stick in the playroom (all 1st gen). These are primarily used for streaming content, e.g. Netflix, Amazon Prime, etc, mythtv front-end for over-the-air TV via Kodi, and now video games!
The following combination of strat mods is simple to install and greatly increases the tonal palette of the instrument IMO. This requires giving up the traditional 3rd position (middle pickup), but that’s a small price to pay.
Tone knob assignment – Connect the first tone knob to the neck & middle pickups and dedicate the second one to the bridge pickup.
Super switch – Replace the standard 5-way with a super switch or 2-pole 5-way w/ the following wiring: N, N+M, N+B, M+B, B This preserves all the “good” strat sounds and adds the “tele” middle sound.
Strangle Switch (aka high-pass filter) – Basically just a .003 capacitor on a push pull potentiometer. This will cut out low-end frequencies and make the guitar sound so funky.
Treble Bleed circut – Add a 560pf cap & 300k resistor to the volume pot to preserve tone while using the volume knob.
I’ve really been enjoying my fake Klein for the past year; it’s a solid guitar and incredibly comfortable to play. That said, I have this personality flaw where once I notice that something is less than ideal, it grates on me ….badly, until I fix it. Thus was the case with the bridge and factory frets.
Since I opened this kit, I’ve know that some fret work was going to be required. Historically this is an area I’ve avoided and sought professional help, but after spending some time on youtube, I decided I am capable of doing this. …….I just needed to acquire some tools first. The main videos I tried to model/emulate were this, this, and this. Most of the supplies came from Stewart MacDonald. I found a lesser expensive notched straight edge and fret rocker on Amazon, and the Meguiar’s polish and buffer wheel were from an auto parts store where I had a gift card.
Growing up I bought a lot of CDs. Even thought I’ve converted them all to MP3s, I still can’t part with my collection. Storing these in a usable manor has been a challenge over the years though. I’m at the point where I think all CD storage that exists sucks. In fact click here if you don’t believe me. The depressing state of this lead me to use an existing book case I already had a few years back.
The finish is now complete on the Klein. Ultimately, I’m happy with it, but in the grand scheme of things I’d rate it as a C- (or if you’re a Futurama fan a C minus-minus). Continue reading “Klein Copy: Part IX”
My replacement JCustom headpeice arrived on Thursday from the good folks at HeadlessUSA. They were incredibly helpful with the few questions I had, and for a couple of reasons I’d recommend buying from them via phone rather than ebay like I did. While I’m not crazy about the extra length this will add to the guitar, the quality easily makes up for it. So far it’s easily been worth the money.
The whole time I’ve been working on this guitar the question in the back of my mind has been: is this cheap thing going to actually sound, play, and function like a “real” guitar? I’m at a point where I can’t make any real progress for a week or two but I this afternoon I thought maybe I should mount the bridge and neck, string it up, and see what she’s like. So I did.
I did a little wet sanding on the satin clear coat this week. …..and sure enough I went right through some of the clear coat and white stain. I was really frustrated when it happened, but honestly it’s not too bad and I’ve decided not to sand any further and re-stain the area.
All of my hardware has arrived with the exception of the new pickguard. I took some time to make sure everything would install as expected. The main piece of the bridge fits in it’s route beautifully, but unfortunately once it’s fully assembled it overhangs on the top of the route.
After several coats of stain the neck and body are turning out exactly how I had envisioned. Each coat of stain raises the grain so it’s a slow process of stain, lightly sand, stain, lightly sand, etc. I’ve done 5 or 6 coats now and I’m getting close to moving to the next step. Hopefully tomorrow night I can start on the satin clear coat. Continue reading “Klein Copy: Part III”
A few months ago I discovered that Alibaba distributes guitar kits for many, many, many different types popular guitars. Of course these are all Chinese knock-offs of the real thing, but they only cost a fraction of the real thing. I was leaning towards getting a Less Paul kit, but a good friend talked me into getting a Klein instead (he got one as well). For example an authentic Klein (when the company was still in business) would sell for between $2-3K (in early 2000 dollars). Currently on ebay they sell for between $5-10k. I had the pleasure of playing two different Kleins while I was in college and they are simply amazing instruments; worth every penny. However, I’m not in a position to justify that kind of money for a guitar.
…..okay so the tile of this should probably be XBMC/Kodi on the FireTV, but whatever.
It’s been over 10 years since I’ve cut the cable with ….cable/satellite, and 7 years since I’ve deployed MythTV and ditched Tivo. Disregarding some negligible hardware costs, I’ve been spending about $20 a year on television. Absolutely awesome! About four years ago I started supplementing local broadcasts with streaming services like Netflix and Amazon. This was great from a content and cost perspective, but proved challenging from a Linux/Flash support perspective. At first the best option was to dual-boot to Windows, but this had extremely low WAF, Wife Acceptance Factor (and even worse OSAF, or open source acceptance factor). About a year ago I picked up some cheap Sony blueray players that supported all the the streaming media capabilities we needed. They’re a great buy and I’d highly recommend these units since they offer a lot for ~$50. The problem this left me with is the fact that I have this old, power hungry, x86 computer next to my televisions, and the percentage has shifted to where we stream 70% of what we watch. I thought about deprecating MythTV, but honestly it’s just too good to ditch. Plus I already have the infrastructure (master backend server and tuners) and we still need something for our movies and broadcast shows. Continue reading “MythTV on the Amazon FireTV”
So RHEL 7 has been out for about a week, not including the beta or RC cycles, and one of the changes is worth documenting. Unless you use a Satellite Server, the concept of registering to RHN is gone. That means no more rhn_reg or rhnreg_ks to get your updates.